Is this art?

================================================================================

Well it could be. The printer needs more calibration.

It’s colder now, so maybe the temperature is affecting things. I’ve added some
cardboard to try and keep the heat in, and stop any cool drafts from
interfering.

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20171205_101631.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20171205_104450.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20171205_142337.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20171205_142342.jpg]

================================================================================
Published December 05, 2017

Generated from the original post:
https://blog.omgmog.net/post/is-this-art/


Max Glenister is an interface designer and senior full-stack developer from
Oxfordshire. He writes mostly about front-end development and technology.

- Mastodon: https://indieweb.social/@omgmog
- Github: https://github.com/omgmog
- Reddit: https://reddit.com/u/omgmog
- Discord: https://discordapp.com/users/omgmog#6206