Merry Grootmas

================================================================================

Another Groot print.. This time for my sister
(she is obsessed with Groot, and who doesn’t love plastic nick-nacks!?)

These models are by dav88 (https://www.thingiverse.com/dav88/about) on
Thingiverse. I printed them at quite a small scale, due to time constraints and
demoing the 3D printer to the family.

The standing model was surprisingly problematic, even with a raft and supports.
I got it to print fully with a more substantial base added, but even then I had
to perform some minor surgery to reattach an arm!

I had more luck with printing the sitting version.

Standing: https://www.thingiverse.com/thing:2328089

Sitting: https://www.thingiverse.com/thing:2664321

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20171205_150713.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20171206_102952.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20171206_104024.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20171224_114050.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20171224_114108.jpg]

================================================================================
Published December 24, 2017

Generated from the original post:
https://blog.omgmog.net/post/merry-grootmas/


Max Glenister is an interface designer and senior full-stack developer from
Oxfordshire. He writes mostly about front-end development and technology.

- Mastodon: https://indieweb.social/@omgmog
- Github: https://github.com/omgmog
- Reddit: https://reddit.com/u/omgmog
- Discord: https://discordapp.com/users/omgmog#6206