Pocket Sprite Laptop Mount

================================================================================

I’ve been playing with this Pocket Sprite a bit lately. It’s a tiny ESP32-based
device that can emulate Gameboy, NES and various other classic game systems.

Besides this, it’s also quite straight-forward to develop for. The development
process is a bit tiresome however, involving a multi-step process to get your
applications on to the device.

To make this a bit less painful, and to distract me from my shortcomings in
writing C, I decided to design a bracket to hold the Pocket Sprite in view while
I’m developing for it.

The design isn’t perfect yet (even 5 6 iterations in!) but it sort of does the
job. You can grab the .stl on Thingiverse
(https://www.thingiverse.com/thing:3001310) if you like too!

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20180629_140755.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20180704_180845.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20180712_160056.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20180712_160116.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20180712_160259.jpg]

================================================================================
Published July 04, 2018

Generated from the original post:
https://blog.omgmog.net/post/pocketsprite-laptop-mount/


Max Glenister is an interface designer and senior full-stack developer from
Oxfordshire. He writes mostly about front-end development and technology.

- Mastodon: https://indieweb.social/@omgmog
- Github: https://github.com/omgmog
- Reddit: https://reddit.com/u/omgmog
- Discord: https://discordapp.com/users/omgmog#6206