Kitchen Tongs Spacer

================================================================================

We’ve got this pair of wooden kitchen tongs that have been through the
dishwasher one too many times and so their binding has lost it’s elasticity. To
fix this, I quickly modelled and printed a spacer to clip between the tongs, to
restore some rigidity.

[IMAGE: https://blog.omgmog.net/images/3d-printing/screen-shot-2018-07-25-at-21.15.37.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20180224_232212.jpg]

[IMAGE: https://blog.omgmog.net/images/3d-printing/IMG_20180224_232221.jpg]

================================================================================
Published February 25, 2018

Generated from the original post:
https://blog.omgmog.net/post/tong-spacer/


Max Glenister is an interface designer and senior full-stack developer from
Oxfordshire. He writes mostly about front-end development and technology.

- Mastodon: https://indieweb.social/@omgmog
- Github: https://github.com/omgmog
- Reddit: https://reddit.com/u/omgmog
- Discord: https://discordapp.com/users/omgmog#6206