Pocket Sprite Laptop Mount
I’ve been playing with this Pocket Sprite a bit lately. It’s a tiny ESP32-based device that can emulate Gameboy, NES and various other classic game systems.
Besides this, it’s also quite straight-forward to develop for. The development process is a bit tiresome however, involving a multi-step process to get your applications on to the device.
To make this a bit less painful, and to distract me from my shortcomings in writing C, I decided to design a bracket to hold the Pocket Sprite in view while I’m developing for it.
The design isn’t perfect yet (even 5 6 iterations in!) but it sort of does the job. You can grab the .stl on Thingiverse if you like too!





Related posts
- I turned my DevTerm into a Game Boy Camera and Printer
The Game Boy Camera was brilliant and stupid in equal measure, a 128x112 pixel sensor bolted on top of a cartridge, printing to thermal paper on a Game Boy Printer the size of a brick. I got both for Christmas when I was 12 and somehow spent hours with them. The minigames are absurd, the image quality is aggressively awful, and the whole thing looks like a prop from a cheap sci-fi film. I loved it.
- The Mangmi Air X
Back in 2015 when I reviewed devices like the GPD XD and similar Android handhelds, the whole ecosystem felt half-baked. Emulation wasn’t particularly good yet, the devices came from obscure Chinese manufacturers, the ROMs were loaded with questionable apps, and the SOCs couldn’t handle much.
- Pico-8 Cartridge Label for GPi Case
The GPi Case is a fancy case for the Raspberry Pi Zero that gives you a screen, speaker, buttons and battery in a design reminiscent of the original DMG-001 Classic Game Boy. I’ve got mine set up to emulate some old game consoles. It’s great. As the GPi Case uses a Raspberry Pi at its core, you can use it to run more than just game emulators. The Raspberry Pi plays Pico-8 games wonderfully (Pico-8 officially supports Raspberry Pi as a platform, too!). I’d always wanted a dedicated Pico-8 console, so the GPi fits the bill perfectly. I bought a second GPi cartridge to make a dedicated Pico-8 cart for my GPi. It contains a Raspberry Pi Zero W and an 8GB Micro SD card with a stripped-down Retropie that boots straight to the Pico-8 splore menu so you can immediately find and launch Pico-8 games made by the community. I put these labels together using found assets and the Pico-8 logo. You can print them on paper and then just glue or tape them onto the cartridge case. Printed dimensions should be: Width: 39.5mm Height: 22.75mm
Discussion
No interactions yet
Comments are closed
You can still reply from your own site with a Webmention.
